ZIMO MN180N18 Next18 Non-Sound Decoder MN-Lok Decoder - Next18

ZIMO MN180N18 Next18 Non-Sound Decoder MN-Lok Decoder - Next18

 

Technical details

Next18 non-sound decoder - 13.3 x 9.5 x 2.6mm 0.7 A - 4 + 2 FA 4 amplified outputs + 2 SUSI + 2 logic level outputs according to VHDM -Standard;
Direct connection of 15 V energy storage on soldering pads (up to 15,000 μF)

Note: Wired decoders (also ...R and ...F types) each have an electrolytic capacitor from 680 to 1000 μF free of charge attached. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Miniature decoder MN180N18 from ZIMO
Next18 interface according to NEM662
Dimensions: 13.3 x 9.5 x 2, 6 mm
Motor/total current: 0.7 A (1.5A peak)
4 function outputs, 4 logic level outputs, 2 of which are also available as servo control lines or SUSI
equipped with all ZIMO Features: DCC, MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc., not mfx-capable
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN180N18
number of pieces:	piece
EAN:	9009606180001
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	Next18
length:	13.3mm
Width:	9.5mm
Height:	2.6mm
Operating modes:	AC, DC, DCC, MM, NOT MFX capable
Connection technology:	Next18
Continuous current:	0.7 A (1.5 A peak)
Current motor output duration:	0.7 A (1.5 A peak)
Function output (total):	4 (+ 4 logic levels)
Current limit. Fu-Off:	0.5A
Logic level outputs:	4
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes (15 V max. 15,000 µF)
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759