ZIMO MN330P22 Standard H0 Non-Sound Decoder MN Locomotive Decoder - PluX22

ZIMO MN330P22 Standard H0 Non-Sound Decoder MN Locomotive Decoder - PluX22

 

Technical details

Standard H0 non-sound decoder - 30x15.3x2.2mm - one-sided - 10+3 FA Direct connection energy storage 15 V on PluX pin strip (unlimited capacity), no wires

Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Decoder MN330P22 from ZIMO with 15 V energy storage connection
PluX 22 interface according to NEM658 on board
Dimensions: 30 x 15.3 x 2.2 mm
Motor/total current: 1.2 A (2.5A peak)
10 function outputs, DCC, MM and mfx, servo control lines, SUSI, RailCom, NMRA and ZIMO function mapping , and much more
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN330P22
number of pieces:	piece
EAN:	9009606330222
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	PluX22
length:	30mm
Width:	15.3mm
Height:	2.2mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	PluX22
Continuous current:	1.2 A (2.5 A peak)
Current motor output duration:	1.2 A (2.5 A peak)
Function output (total):	10 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on the PluX plug (15 V)
Low voltage for Fu output:	no
Switching inputs:	1
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759