ZIMO MS450P22 Sound Decoder - 30 x 15 x 4 mm MS Sound Decoder - PluX22

ZIMO MS450P22 Sound Decoder - 30 x 15 x 4 mm MS Sound Decoder - PluX22

 

Technical details

Sound decoder - 30 x 15 x 4 mm - Audio 3 W (4 Ohm) - 1.2 A - 9 FA Direct connection energy storage 15 V (unlimited capacity) on PluX pin strip, none Wires

Note: Wired decoders (also ...R and ...F types) are each supplied with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.

MS sound decoder MS450P22 with 16-bit sound from ZIMO with 16 V energy storage connection
PluX 22 interface according to NEM658 Circuit board
Dimensions 30 x 15 x 4 mm
Motor/total current: 1.2 A (2.5 A peak)
Audio power: 3 W
10 function outputs, ( 1 of which is on soldering pads), 2 logic level and servo outputs
equipped with all ZIMO features: DCC, mfx, MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
mfx with automatic Registration at the digital center
Speakers from 4 to 8 ohms can be used.

The decoder is delivered with the sound collection ZSP01006 with steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sound for BR211
If you would like to have a different sound project installed, please order the desired sound project (free or coded) separately (see "Configuration" or product recommendations)
Note: 8-bit sound projects usually run on these decoders without Limitations, but in individual cases there may be compatibility problems. In these cases, please contact us and we will support you in finding a suitable solution. In the medium term, all 8bit sound projects will be revised by the sound developers and specially adapted to the MS decoder, but this will take a certain amount of time. We ask for your understanding.

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS450P22
number of pieces:	piece
EAN:	9009606450227
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	PluX22
length:	30mm
Width:	15mm
Height:	4mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	PluX22
Continuous current:	1.2 A (2.5 A peak)
Current motor output duration:	1.2 A (2.5 A peak)
Function output (total):	10 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on the PluX connector
Low voltage for Fu output:	5 V possible
Switching inputs:	1
Speaker output:	1 (3 Watt/4 - 8 Ohm on MTC connector)
Audio performance:	3 watts/4 - 8 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759