ZIMO STACO2B 1 x StayAlive controller (2 pieces 1F / 2.7V) Accessories - Wires

ZIMO STACO2B 1 x StayAlive controller (2 pieces 1F / 2.7V) Accessories - Wires

 

Technical details

1 x StayAlive controller (14x10.4x1.9mm) with 2 x 1F / 2.7V gold caps (each 6.4x9.8mm); only for decoders with Next18 interface NEM 662;
13 wires
StayAlive controller with Next18 interface
STACO2 is intended to equip a model with a Next-18 interface and an energy storage device. A Next-18 decoder can then be plugged onto the STACO2 like an adapter board, which then outputs the decoder connections via 13 soldered wires.
Dimensions: 14 x 10.4 x 2 mm
The StayAlive controllers may only be operated with a maximum of 18 V rail voltage!

2 mini gold caps are connected to the StayAlive controller via wires; This means that all parts (decoder, STACO, gold caps) are spatially distributed - in contrast to a massive "power pack". The board transforms the voltage of the gold caps (a total of 5.2 V for 2 gold caps; when fully charged, this drops to around 2 V over time) to 10 V, which is sufficient for the decoder's backup power supply in the event of wheel-rail contact interruptions (for drive and sound without loss of volume) and does not cause any interference, e.g. in service mode.
Scope of delivery:
1x STACO2
2x mini gold caps, 1.0F / 2.7V, 6.4x9.8mm
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	STACO2B
number of pieces:	2 gold caps
EAN:	9009606775337
Product Type:	Accesories
track:	neutral
Connections::	Wires
capacity:	0.6F
Current (V):	2.7V
length:	14mm
Width:	4mm
Height:	1.9mm
Age recommendation:	14 years and older
WEEE No.:	EN 19640759