ZIMO MN330 Wired version of the MN330 MN locomotive decoder - wires

ZIMO MN330 Wired version of the MN330 MN locomotive decoder - wires

 

Technical details

Wired version of the MN330 11 connecting wires (2 x rail, 2 x motor, common plus, ground, electrolytic plus, 4x FA) 9 soldering pads (6x FA, 2 SUSI, 1x switching input or . Logic level output)

Note: Wired decoders (also ...R and ...F types) are each supplied with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Decoder MN330 from ZIMO with 15 V energy storage connection
with 11 connecting wires
Dimensions: 30 x 15.3 x 2.2 mm
Motor/total current: 1.2 A (2.5A peak)
10 function outputs, DCC, MM and mfx, servo control lines, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
/>

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN330
number of pieces:	piece
EAN:	9009606330901
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	Wires
length:	30mm
Width:	15.3mm
Height:	2.2mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	11 wires
Continuous current:	1.2 A (2.5 A peak)
Current motor output duration:	1.2 A (2.5 A peak)
Function output (total):	10 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes with wires (15 V)
Low voltage for Fu output:	no
Switching inputs:	1
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759