ZIMO MN170 Wired variant of the MN170 MN-Lok decoder - wires

ZIMO MN170 Wired variant of the MN170 MN-Lok decoder - wires

 

Technical details

Wired variant of the MN170, 9 connecting wires (2 x rail, 2 x motor, Gem. Plus, 4x FA) 5 soldering pads (2x FA, 2 SUSI, ground)

Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Small decoder MN170 from ZIMO
with 10 connecting wires

Dimensions: 12.0 x 8.6 x 2 .5 mm
Motor/total current: 0.7 A (1.5A peak)
6 function outputs (4 on wires, 2 on solder pads), 2 logic level outputs, DCC and MM, servo control lines , SUSI, RailCom, NMRA and ZIMO function mapping, etc., not mfx-capable
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN170
number of pieces:	piece
EAN:	9009606170903
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	Wires
length:	12mm
Width:	8.6mm
Height:	2.3mm
Operating modes:	AC, DC, DCC, MM, NOT MFX capable
Connection technology:	9 wires
Continuous current:	0.7 A (1.5 A peak)
Current motor output duration:	0.7 A (1.5 A peak)
Function output (total):	6 (+ 2 logic levels)
Current limit. Fu-Off:	0.5A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	no
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759