ZIMO MN340D MN340C, but FA3 to FA6 reinforced MN locomotive decoder - MTC21 (NEM660)

ZIMO MN340D MN340C, but FA3 to FA6 reinforced MN locomotive decoder - MTC21 (NEM660)

 

Technical details

Like MN340C, but FA3 to FA6 pre-configured as amplified outputs

Note: Wired decoders (also ...R and ...F types) are each supplied with a free electrolytic capacitor of 680 to 1000μF. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Decoder MN340D from ZIMO with 15 V energy storage connection
with 21-pin mtc interface according to NEM660

Dimensions: 30 x 15.3 x 2.2 mm
Motor/total current: 1.2 A (2.5A peak)
8 function outputs, 2 logic level and 2 servo outputs, DCC, MM and mfx, servo control lines, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
Version with FA3, FA4, FA5 and FA6 as normal outputs. This does not correspond to the 21MTC standard. Alternatively, there is also the MN340C with FA3, FA4, FA5 and FA6 as standard logic level outputs.
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN340D
number of pieces:	piece
EAN:	9009606340214
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	MTC21 (NEM660)
length:	28.6mm
Width:	15.3mm
Height:	2.5mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	21MTC FA3, FA4, FA5, FA6 "amplified" outputs
Continuous current:	1.2 A (2.5 A peak)
Current motor output duration:	1.2 A (2.5 A peak)
Function output (total):	4 (+ 6 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	6
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on solder pads (15 V)
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759