ZIMO MS500N subminiature sound decoder - 14 x 10 x 2.6 mm MS sound decoder - 6-pin. NEM651 on wires
Technical details
Subminiature sound decoder - 14 x 10 x 2.6 mm - Audio 1 W - 0.7 A - 4 FA Direct connection Energy storage 15 V (up to 1000 μF or up to 3000 μF if no service mode and SW update/sound loading), 4 connection wires (Gem.Plus, GROUND, 2 x speakers), 6 soldering pads (2 FA, 2 SUSI, +5V, Elko Plus)
Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
MS subminiature sound decoder MS500N with 16-bit sound from ZIMO
The decoder is special due to its small size suitable for N and TT models
with 6-pin NEM651 interface directly on the circuit board
Dimensions 14 x 10 x 2.6 mm
Motor/total current: 0.7 A (1.5 A tip)
Audio power: 1 W
4 function outputs, (including 2 on the plug, 2 on soldering pads), 2 logic level and servo outputs
equipped with ZIMO Features: DCC , MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
Loudspeakers of 8 ohms can be used.
The decoder is delivered with the sound collection ZSP01006 with steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sound for BR211
If you would like to have another sound project installed, please order the desired sound project (Free or Coded) separately (see "Configuration" or product recommendations)
RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen
Characteristics:
Manufacturer: | ZIMO |
Item number: | MS500N |
number of pieces: | piece |
EAN: | 9009606500069 |
Product Type: | MS Sound Decoder |
track: | neutral |
Digital decoder: | Yes |
Connections:: | 6-pin NEM651 on wires |
length: | 14mm |
Width: | 10mm |
Height: | 2.6mm |
Operating modes: | AC, DC, DCC, MM |
Connection technology: | NEM651 (6 pin connector) |
Continuous current: | 0.7 A (1.5 A peak) |
Current motor output duration: | 0.7 A (1.5 A peak) |
Function output (total): | 4 (+ 2 logic levels) |
Current limit. Fu-Off: | 0.5A |
Logic level outputs: | 2 |
LED outputs: | 2 |
Servo outputs: | 2 |
Servo control line: | No (ext. 5 V required) |
SUSI: | Yes |
Dir. Energy Saving Connection: | yes on solder pad max. 1000 µF |
Low voltage for Fu output: | 5 V (max. 50 mA on solder pad) |
Switching inputs: | (2 alternative applications logic levels |
Speaker output: | 1 (1 watt/ 8 ohms) |
Audio performance: | 1 watt/8 ohms |
Sound memory: | 128 Mbps |
Age recommendation: | 14 years and older |
WEEE No.: | EN 19640759 |