ZIMO STACO4 StayAlive controller Goldcap buffer memory

ZIMO STACO4 StayAlive controller Goldcap buffer memory

 

Technical details

StayAlive controller for decoders with no or limited provisions for direct energy storage connection
2 miniature gold caps can be connected via the ZIMO STACO4

Advantages of STACO4
- Higher rail voltage possible with max. 24V
- Gold caps with higher voltage 3V
- Faster charging time

For connection (via wires) to the decoder pads or pins "Decoder Plus / Gem. Plus" and "Decoder MASSE".

Dimensions: 10 x 7.3 x 1.7 mm

The STACO4 may be operated with a maximum of 24 V rail voltage! STACO1, 2 and 3 may only be operated with 18 V.

2 mini gold caps 3V are connected to the StayAlive controller via wires; this allows all parts (decoder, STACO, gold caps) to be housed in a distributed manner - in contrast to a massive "power pack". The board transforms the voltage of the gold caps (a total of 5.8 V for 2 gold caps; when fully charged, this drops to approx. 2V over time) to 10V, which is sufficient for the backup supply of the decoder in the event of wheel-rail contact interruptions (for drive and sound without loss of volume) and does not cause any interference, e.g. in service mode.

Scope of delivery ZIMO STACO4:
1x STACO4
2x mini gold caps 0.3F / 3V, 4x10mm

 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	STACO4
number of pieces:	1 piece
Product Type:	Accesories
track:	neutral
length:	10mm
Width:	7.3mm
Height:	1.7mm
Age recommendation:	from 14 years
WEEE No.:	EN 19640759