ZIMO MS500N MS sound decoder - 6-pin. NEM651 on wires

Product no.: MS500N

ZIMO MS500N subminiature sound decoder - 14 x 10 x 2.6 mm MS sound decoder - 6-pin. NEM651 on wires

 

Technical details

Subminiature sound decoder - 14 x 10 x 2.6 mm - Audio 1 W - 0.7 A - 4 FA Direct connection Energy storage 15 V (up to 1000 μF or up to 3000 μF if no service mode and SW update/sound loading), 4 connection wires (Gem.Plus, GROUND, 2 x speakers), 6 soldering pads (2 FA, 2 SUSI, +5V, Elko Plus)

Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.

MS subminiature sound decoder MS500N with 16-bit sound from ZIMO
The decoder is special due to its small size suitable for N and TT models
with 6-pin NEM651 interface directly on the circuit board
Dimensions 14 x 10 x 2.6 mm
Motor/total current: 0.7 A (1.5 A tip)
Audio power: 1 W
4 function outputs, (including 2 on the plug, 2 on soldering pads), 2 logic level and servo outputs
equipped with ZIMO Features: DCC , MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
Loudspeakers of 8 ohms can be used.

The decoder is delivered with the sound collection ZSP01006 with steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sound for BR211
If you would like to have another sound project installed, please order the desired sound project (Free or Coded) separately (see "Configuration" or product recommendations)

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS500N
number of pieces:	piece
EAN:	9009606500069
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	6-pin NEM651 on wires
length:	14mm
Width:	10mm
Height:	2.6mm
Operating modes:	AC, DC, DCC, MM
Connection technology:	NEM651 (6 pin connector)
Continuous current:	0.7 A (1.5 A peak)
Current motor output duration:	0.7 A (1.5 A peak)
Function output (total):	4 (+ 2 logic levels)
Current limit. Fu-Off:	0.5A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on solder pad max. 1000 µF
Low voltage for Fu output:	5 V (max. 50 mA on solder pad)
Switching inputs:	(2 alternative applications logic levels
Speaker output:	1 (1 watt/ 8 ohms)
Audio performance:	1 watt/8 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759

• Zimo Sound: without sound project
• Zimo Sound: ZIMO "free" sound project (+9,00 €)
• Zimo Sound: "coded" sound project (+18,00 €)
• Zimo Sound: "coded" sound project (LGB) (+28,00 €)