ESU 58751 - LokSound 5 micro DCC Direct Atlas Legacy "empty decoder", Retail, with speaker 11x15mm, Gauge: N

ESU 58751 - LokSound 5 micro DCC Direct Atlas Legacy "empty decoder", Retail, with speaker 11x15mm, Gauge: N

Technical details

The LokSound 5 micro DCC Direct was specially developed for installation in older N gauge vehicles from the Atlas and Intermountain brands (produced before 2016): It can be inserted directly in place of the analogue board installed as standard. But the decoder can also be used for similar models from other manufacturers at your own discretion.
The LokSound 5 micro DCC Direct Atlas Legacy with its dimensions of 66.0mm x 8.2mm is a pure DCC decoder and comes with an 11x15mm “Sugarcube “ Loudspeaker delivered.

Operating modes

The LokSound 5 micro DCC Direct Atlas Legacy is a “pure” DCC decoder. 14 to 128 speed levels are as natural as 2 and 4 digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital control center fully automatically.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program the CVs from 1-255.
The LokSound 5 micro DCC Direct Atlas Legacy decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokSound 5 micro DCC Direct Atlas Legacy can be used on analogue DC trains. The decoder switches between the operating modes fully automatically “on the fly”. Most of the time nothing needs to be set.

Sound

The LokSound 5 micro DCC Direct Atlas Legacy decoder can play up to 12 channels at the same time. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your system. There is practically no audible difference from the original. A Class-D audio power amplifier with up to 3W output power drives the speakers, which can have an impedance of between 4 ohms and 32 ohms. A 128 Mbit sound memory ensures enough capacity.
All individual sounds can be individually adjusted in volume. The super-flexible sound engine without a rigid schedule allows the exact simulation of all conceivable rail vehicles.

Functions

There are two directly soldered LEDs on the LokSound 5 micro DCC Direct Atlas Legacy, which are used for the front headlights and are provided at the rear. Alternatively, two wired LEDs can be soldered to suitable lengths and used for lighting. Two additional outputs (AUX3 and AUX4) can be used for general switching purposes. Light functions are available. The brightness of each output can be adjusted separately.

Motor control

The motor control of the LokSound 5 micro DCC Direct Atlas Legacy has a variably adjustable PWM clock frequency from 10kHz to 50kHz, which is just ensures super-quiet operation in bell-armature motors - the previously typical “humming” is a thing of the past. The load control can also be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. The LokSound 5 micro DCC Direct Atlas Legacy delivers up to 0.75A motor current.

Operational safety

If desired, a PowerPack can be connected to the LokSound 5 micro DCC Direct Atlas Legacy to bridge dirty rail sections

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.


If you would like to have a sound project installed, please order the desired sound project separately (see "Recommendation tab" or via the configuration)

 

Characteristics:

Manufacturer:	ESU
Item number:	58751
number of pieces:	1 piece
EAN:	4044645587515
Product Type:	decoder
track:	N
Electricity system:	DC
operation mode:	DCC / AC Sound
interface:	Direct
Digital decoder:	Yes
Connections::	Direct
length:	47.5mm
Width:	14.0mm
Operating modes:	DCC
Connection technology:	Direct
Continuous current:	1.1A
Function output (total):	6x Power 2 with LED 1x logic level
Current limit. Fu-Off:	180mA
Logic level outputs:	1
LED outputs:	Light effects
Servo outputs:	no
SUSI:	no
Dir. Energy Saving Connection:	no
Speaker output:	Yes
Audio performance:	1.5W, 4-32 Ohm
Sound memory:	128 Mbps
Weight:	6g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525