ESU 58731 - LokSound 5 micro DCC Direct Kato Japan "Empty decoder", retail, gauge: N

ESU 58731 - LokSound 5 micro DCC Direct Kato Japan "Empty decoder", retail, gauge: N

Technical details

The LokSound 5 micro DCC Direct Kato Japan was specially developed for installation in N gauge vehicles of the Kato brand: In many European and Japanese locomotives from this manufacturer, this decoder can be inserted directly below the motor instead of the standard analogue board. Finally, these models can also be easily retrofitted with a LokSound decoder.
The LokSound 5 micro DCC Direct Kato Japan with its dimensions of 27.6mm x 14.1mm x 3mm is a pure DCC decoder and is supplied without a loudspeaker.

Operating modes

The LokSound 5 micro DCC Direct Kato Japan is a "pure" DCC decoder. 14 to 128 speed levels are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital control center.
It can handle all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control centers that can only program CVs from 1-255.
The LokSound 5 micro DCC Direct Kato Japan decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct current is also possible. It also stops with a Selectrix® brake diode. An ABC shuttle train automation enables automatic commuting between two stations. The LokSound 5 micro DCC Direct Kato Japan can be used on analogue direct current railways.
The decoder switches between the operating modes fully automatically "on the fly". Usually nothing needs to be set.

Sound

The LokSound 5 micro DCC Direct Kato Japan decoder can play back up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio power amplifier with up to 3W output power controls the loudspeakers, which can have an impedance between 4 ohms and 32 ohms. A 128 Mbit sound memory ensures sufficient capacity.
The volume of all individual sounds can be individually adjusted. The super-flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles.

Functions

Although the LokSound 5 micro DCC Direct Kato Japan is normally installed in the motor car of a railcar set, there are three amplified function outputs for lighting at your own discretion. All important lighting functions are available. The brightness of each output can be set separately.

Motor control

The motor control of the LokSound 5 micro DCC Direct Kato Japan has a variably adjustable PWM clock frequency of 10kHz to 50kHz, which ensures super-quiet operation, especially with bell-armature motors - the typical "humming" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. The LokSound 5 micro DCC Direct Kato Japan decoder supplies up to 0.75A motor current.

Protection

The outputs are of course protected against overload. We want you to enjoy your decoder for as long as possible.


If you would like to have a sound project installed, please order the desired sound project separately (see "Recommendation tab" or via the configuration)

 

Characteristics:

Manufacturer:	ESU
Item number:	58731
number of pieces:	1 piece
EAN:	4044645587317
Product Type:	decoder
track:	N
Electricity system:	DC
operation mode:	DCC / AC Sound
interface:	Direct
Digital decoder:	Yes
Connections::	Direct
length:	27.6mm
Width:	14.1mm
Operating modes:	DCC
Connection technology:	Direct
Continuous current:	0.54A
Function output (total):	3xPower
Current limit. Fu-Off:	180mA
LED outputs:	Light effects
Servo outputs:	no
SUSI:	no
Dir. Energy Saving Connection:	no
Speaker output:	Yes
Audio performance:	1.5W, 4-32 Ohm
Sound memory:	128 Mbps
Weight:	2g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525