ESU 58315 - LokSound 5 L DCC/MM/SX/M4 "empty decoder", pin header with adapter, retail, gauge: 0

ESU 58315 - LokSound 5 L DCC/MM/SX/M4 "empty decoder", pin header with adapter, retail, gauge: 0

 

Technical details

The LokSound 5 L finds its place wherever the LokSound 5 no longer “fits” in terms of performance. These are ideally vehicles of nominal size 0, but smaller gauge 1 vehicles are also no problem for the LokSound 5 L. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm, it is equipped with a dual speaker output and integrated PowerPack.
The Loksound 5 L is always equipped with pin headers and is supplied ex works with an adapter board, which has solder connection points.

Operating modes

Like all family members, the LokSound 5 L is a true multi-protocol decoder. It supports the DCC data format as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed levels are as standard as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital control center fully automatically.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program CVs from 1-255.
Motorola® users benefit from up to 28 speed levels with 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.
The M4 protocol allows automatic registration to mfx®-compatible control centers.
The LokSound 5 L decoder also recognizes the Märklin® braking distances ZIMO® HLU brake commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokSound 5 L decoder can be used on analog direct and alternating current trains.

Sound

The LokSound 5 L decoder can play up to 10 channels at the same time. Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers HiFi quality on your system. There is practically no audible difference from the original. A double Class-D audio power amplifier with up to two times 3W output power drives the speakers, which can have an impedance of between 4 ohms and 32 ohms. The huge 128 Mbit sound memory ensures enough capacity.
All individual sounds can be individually adjusted in volume. The super-flexible sound engine without a rigid schedule allows the exact simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles.

Functions

Each LokSound 5 L decoder comes with 11 amplified function outputs. There are also 6 additional logic level outputs, which can also control (2 pieces) RC servos or SUSI expansion modules if desired. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder controls automatic pressing and releasing when uncoupling for ROCO®, Krois® and Telex® couplings. 4 sensor inputs can trigger functions if desired.

Motor control

The motor control of the LokSound 5 L has once again been fundamentally improved. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially with bell-armature motors - the typical “humming” is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. The LokSound 5 LDecoder delivers enough juice with up to 3.0A motor current.


If you would like to have a sound project recorded, please order the desired sound project separately (see "Recommendation tab" or via the configuration)


 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	58315
number of pieces:	1 piece
EAN:	4044645583159
Product Type:	decoder
track:	0, 1
Electricity system:	DC/AC
operation mode:	DCC / AC Sound
interface:	Pin headers
Digital decoder:	Yes
Connections::	Pin headers
length:	25.4mm
Width:	51.8mm
Height:	14.0mm
Operating modes:	DCC/MM/SX/M4
Connection technology:	Pin headers
Continuous current:	5.5A
Function output (total):	11x Power 1x logic level instead of wheel sensor 2x logic level instead of SUSI 2x logic level instead of Servo3/Servo4 1x Smokeunit heating 1x Smokeunit motor control
Current limit. Fu-Off:	500mA
Logic level outputs:	3
LED outputs:	Light effects
Servo outputs:	2x fixed, 2x instead of Susi
SUSI:	on circuit board
Dir. Energy Saving Connection:	integrated 2x 1F/2.7F
Switching inputs:	1x wheel sensor, 2x sensor input, 1x engine off (“Vitrinenmodus”), 1x Smokeunit temperature sensor
Speaker output:	Yes
Audio performance:	3.0W, 4-32 ohms
Sound memory:	128 Mbps
Weight:	5.9g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525