ESU 59626 - LokPilot 5 DCC, 6-pin NEM651, retail, gauge H0 ,0

ESU 59626 - LokPilot 5 DCC, 6-pin NEM651, retail, gauge H0 ,0

Technical details

The LokPilot 5 DCC is the “twin brother” of the LokPilot 5. The two share almost all features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. However, this lack of flexibility is rewarded with a lower price
LokPilot 5 decoders are offered with all common interfaces.

Operating modes

The LokPilot 5 DCC is a “purebred” DCC decoder. 14 to 128 speed levels are as natural as 2 and 4 digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital control center fully automatically.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program the CVs from 1-255.
The LokPilot 5 DCC decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokPilot 5 DCC decoder can be used on analogue DC railways. The maximum speed can be set separately.
The decoder switches between the operating modes fully automatically “on-the-fly”. Most of the time nothing needs to be adjusted.

Functions

We know that you want your locomotives to be as realistic as possible. We have therefore packed the LokPilot 5 DCC with function outputs. Depending on the interface version, each LokPilot 5 DCC decoder offers at least 10 amplified function outputs, each with 250mA output current. The versions with PluX22 or 21MTC interface have 4 additional outputs for controlling servos or logic level outputs. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder controls the automatic pressing and uncoupling when uncoupling for ROCO®, Krois® and Telex® couplings.

Motor control

The motor control of the LokPilot 5 DCC has once again been fundamentally improved. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially with bell-armature motors - the typical “humming” is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 DCC decoder delivers enough juice even for older motors.

Operational safety

If desired, a PowerPack can be connected to the LokPilot 5 DCC to bridge dirty rail sections

Protection

Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

 

Characteristics:

Manufacturer:	ESU
Item number:	59626
number of pieces:	1 piece
EAN:	4044645596265
Product Type:	decoder
Electricity system:	DC
operation mode:	DCC / AC Digital
interface:	6 pin NEM 651
Digital decoder:	Yes
Connections::	6 pin NEM 651
length:	21.4mm
Width:	15.5mm
Height:	4.5mm
Operating modes:	DCC
Connection technology:	6 pin NEM 651
Function output (total):	10
Current limit. Fu-Off:	250mA
LED outputs:	Light effects
Servo outputs:	2
SUSI:	Yes
Dir. Energy Saving Connection:	retrofittable
Weight:	1.6g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525