ESU 59325 - LokPilot 5 L DCC, pin header with adapter, retail, gauge 0, G, I

ESU 59325 - LokPilot 5 L DCC, pin header with adapter, retail, gauge 0, G, I

Technical details

The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. These are ideally vehicles of nominal size 0, but also gauge 1 vehicles that should be equipped without noise. The LokPilot 5 L is mechanically compatible with the LokSound 5 L decoder and has the same connection pins.

Operating modes

The LokPilot 5 L is a true multi-protocol decoder. It supports the DCC data format as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed levels are as standard as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital control center fully automatically.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program CVs from 1-255.
Motorola® users benefit from up to 28 speed levels with 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.
The M4 protocol allows automatic registration to mfx®-compatible control panels. All 32 possible function keys are offered.
The LokPilot 5 L decoder recognizes the Märklin® braking routes as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokPilot 5 L decoder can be used on analog direct current and alternating current railways. The maximum speed can be set separately.
The decoder switches between the operating modes fully automatically “on-the-fly”. Most of the time nothing needs to be set.

Functions

Each LokPilot 5 L has 11 amplified function outputs, each with a load capacity of 500mA. There are also 6 additional logic level outputs, which can also control (2 pieces) RC servo or SUSI expansion modules if desired. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder controls automatic pressing and releasing when uncoupling for ROCO®, Krois® and Telex® couplings. Two sensor inputs can trigger functions if desired.

Motor control

The motor control of the LokPilot 5 L has once again been fundamentally improved. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially with bell-armature motors - the typical “humming” is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique “Autotune” function enables the decoder to be automatically calibrated to the motor. With up to 3.0A motor current, the LokPilot 5 L decoder delivers enough juice even for older engines.

Operational safety

A PowerPack installed directly on the decoder helps to bridge dirty rail sections.

Protection

Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

 

Characteristics:

Manufacturer:	ESU
Item number:	59325
number of pieces:	1 piece
EAN:	4044645593257
Product Type:	decoder
Electricity system:	DC/AC
operation mode:	DCC / AC Digital
interface:	Pin headers
Digital decoder:	Yes
Connections::	Pin headers
length:	25.4mm
Width:	51.8mm
Height:	14.0mm
Operating modes:	DCC/MM/SX/M4
Connection technology:	Pin headers
Function output (total):	11
Current limit. Fu-Off:	250mA
Logic level outputs:	4
LED outputs:	Light effects
Servo outputs:	2+2
SUSI:	Yes
Dir. Energy Saving Connection:	integrated
Weight:	1.8g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525