ESU 59220 - LokPilot 5 Fx DCC, 8-pin NEM652, Retail, Gauge H0, 0

ESU 59220 - LokPilot 5 Fx DCC, 8-pin NEM652, Retail, Gauge H0, 0

 

Technical details

The LokPilot 5 Fx DCC is a functional decoder without a motor output and is therefore perfect for installation in control cars or functional models. As the “twin brother” of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is delivered in three variants: In addition to the “classic” version with an 8-pin NEM 652 cable harness, a variant for the 21MTC interface and with a PluX22 interface is also available.

Operating modes

The LokPilot 5 Fx DCC is a “pure” DCC decoder. 14 to 128 speed levels are as natural as 2 and 4 digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital control center fully automatically.
It controls all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control panels that can only program the CVs from 1-255.
The LokPilot 5 Fx DCC decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with direct voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. Although this decoder of course does not have a motor output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.
The LokPilot 5 Fx DCC decoder can be used on analogue DC railways.
The decoder switches between the Operating modes fully automatically “on-the-fly”. Most of the time nothing needs to be set.

Functions

The LokPilot 5 Fx DCC is equipped with an astonishing number of function outputs. Depending on the interface version, each LokPilot 5 Fx DCC decoder offers at least 10 amplified function outputs, each with 250mA output current. The versions with PluX22 or 21MTC interface have 4 additional outputs for controlling servos or logic level outputs. All important lighting functions are available. The brightness of each output can be adjusted separately.

Interaction

The LokPilot 5 Fx DCC is designed to interact with the LokSound 5 and the LokPilot 5 decoders: This is possible, for example to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Assuming the same address, both behave absolutely identically. The identical arrangement of the CVs makes it easier to coordinate the two decoders.

Operational reliability

If desired, a PowerPack can be connected to the LokPilot 5 Fx DCC to bridge dirty rail sections.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	59220
number of pieces:	1 piece
EAN:	4044645592205
Product Type:	decoder
Electricity system:	DC
operation mode:	DCC / AC Digital
interface:	8 pin NEM 652
Digital decoder:	Yes
Connections::	8 pin NEM 652
length:	17mm
Width:	15.5mm
Height:	4.5mm
Operating modes:	DCC
Connection technology:	8 pin NEM 652
Function output (total):	10
Current limit. Fu-Off:	250mA
LED outputs:	Light effects
Servo outputs:	2
SUSI:	Yes
Dir. Energy Saving Connection:	retrofittable
Weight:	1.2g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525