ESU 59212 - LokPilot 5 Fx DCC/MM/SX, PluX22 NEM658, Retail, Gauge H0, 0

ESU 59212 - LokPilot 5 Fx DCC/MM/SX, PluX22 NEM658, Retail, Gauge H0, 0

 

Technical details

The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or functional models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital control centers. It shares its flexible function key assignment and the diverse lighting effects with the other LokPilot 5 decoders from ESU.
The LokPilot 5 Fx is available in three versions: In addition to the "classic" version with an 8-pin NEM 652 wiring harness, a version for the 21MTC interface and with a PluX22 interface is also available.

Operating modes

The LokPilot 5 Fx is a multi-protocol decoder. It supports the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14-128 speed steps are as natural as 2- and 4-digit addresses. Up to 28 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital control center (e.g. ECoS).
It supports all DCC programming modes and can be operated and programmed with all DCC-compatible digital control centers: RailCom® also makes it possible to read the CV values on the main track with suitable control centers. There are auxiliary registers for control centers that can only program CVs from 1-255 (e.g. ROCO® Multimaus).
Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable 16 functions to be triggered. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.
The LokPilot 5 Fx decoder recognizes the Märklin® braking sections as well as ZIMO®-HLU/ZACK braking commands or the Lenz® ABC system. Braking with DCC braking modules or with direct current is also possible. In addition, it also "stops" with a Selectrix® braking diode. An ABC shuttle train automatic enables automatic commuting between two stations. Although this decoder does not have a motor output, this is also important for a function decoder in order to be able to synchronize the control car and the motor car.
The LokPilot 5 FX decoder can be used on analogue direct current and alternating current railways. The decoder switches between the operating modes fully automatically "on the fly". Usually nothing needs to be set.

Functions

The LokPilot 5 Fx has been equipped with an astonishing number of function outputs. Depending on the interface version, each LokPilot 5 Fx decoder offers at least 10 amplified function outputs, each with 250mA output current. The versions with PluX22 or 21MTC interface have 4 additional outputs for controlling servos or logic level outputs. All important light functions are available. The brightness of each output can be set separately.

Interaction

The LokPilot 5 Fx is designed to work with the LokSound 5 and the LokPilot 5 decoders: For example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx. Provided they have the same address, both behave absolutely identically. The identical arrangement of the CVs makes it easier to coordinate the two decoders.

Operational safety

If required, a PowerPack can be connected to the LokPilot 5 Fx to bridge dirty track sections.

Protection

The outputs are of course protected against overload. We want you to enjoy your decoder for as long as possible.

 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	59212
number of pieces:	1 piece
EAN:	4044645592120
Product Type:	decoder
Electricity system:	DC/AC
operation mode:	DCC / AC Digital
interface:	PluX22
Digital decoder:	Yes
Connections::	PluX22
length:	16.5mm
Width:	15.5mm
Height:	4.5mm
Operating modes:	DCC/MM/SX
Connection technology:	PluX22
Function output (total):	10
Current limit. Fu-Off:	250mA
LED outputs:	Light effects
Servo outputs:	2
SUSI:	Yes
Dir. Energy Saving Connection:	retrofittable
Weight:	2.2g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525