BRAWA 40936 - H0 express train locomotive BR 001 DB

BRAWA 40936 - H0 express train locomotive BR 001 DB

Prototype information

Before the BR 01 series gained its reputation as “the” German express locomotive, the companies Borsig (01 001-008) and AEG (01 009-010) delivered a total of ten pre-series locomotives to the German Reichsbahn Gesellschaft (DRG). It started with 01 008, which is still preserved today and was handed over to the DRG on January 10, 1926. However, the locomotives were ahead of their time back then, as many routes and depots were not yet prepared for an axle load of 20 tons. The operational routes were therefore still very limited in the first few years of operation. This caused the testing of the new locomotives to take longer. The most noticeable difference to the later series locomotives was that the first ten 01s had a visibly longer driver's cab. In addition, there were differences in the structural design of the frame as well as many other details.

Model details

For the first time, large-scale series model of the pre-series 01
Typical differences to the BR 01 series implemented
Modified frame fore shoe
Pre-series with longer driver's cab
Boiler, driver's cab and tender made as finely detailed plastic components
Opened bar frame and spoked wheels made of die-cast zinc
Smoke generator and sound decoder installed or .Prepared for installation
Lighted driver's cab
Epoque-appropriate lighting
Standard shaft at the rear, backdrop-guided
Short coupling between locomotive and tender
True-to-original replica of the standing tank rear wall
Fine printing and painting
Cables and attached parts with low wall thickness
Individually attached steps and steps
Drive in the tender for optimal driving characteristics
Individual axle bearings in metal
Scale axle base
Delicate drive and coupling rods made of metal
Fire flickering
Engine lighting
Control carrier in welded design
Tender 2'2' T34" design

Technical details

Length over buffer: 275.3 mm
Minimum passable radius: 360 mm
Interface: PluX22
Number of traction tires: 4
Flywheel: built-in
Light change: three-light Headlights change in the direction of travel
Interior lighting: installed
Short coupling kinematics: installed
Smoke generator: For Seuthe no. 20 prepared
Sound: prepared

 

Characteristics:

Manufacturer:	BRAWA
Item number:	40936
number of pieces:	1 piece
EAN:	4012278409368
track:	H0
scale:	1:87
model series:	Steam locomotive BR 01
Company number:	001 234-4; BD Regensburg; BW Hof
Railway company:	DB
country:	EN
epoch:	IV
Electricity system:	DC
operation mode:	DC Analogue BASIC+
interface:	PluX22
engine:	pole motor
Motor with flywheel:	built-in
traction tires:	4
Length over buffers:	275.3mm
Minimum radius:	360mm
coupling:	NEM 362 shaft with KK kinematics
Interior lighting:	built-in
Cab lighting:	digitally switchable
Top light:	Triple headlights that change in the direction of travel
sound:	prepared
Smoke generator:	For Seuthe no. 20 prepared
Age recommendation:	14 years and older
WEEE no.:	DE14862574