ZIMO MS491 Wired variant of the MS491 with 5 feet of MS sound decoder wires

ZIMO MS491 Wired variant of the MS491 with 5 feet of MS sound decoder wires

 

Technical details

Wired variant of the MS491 with 5 Fu outputs: 12 connecting wires (2 x rail, 2 x motor, common plus, GROUND, 4 FA, 2 x loudspeaker)
Note: Wired Decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.

The decoder is delivered with the sound collection ZSP01006 with steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sounds for BR211
If you would like to have a different sound project installed, please order the desired sound project (free or coded) separately (see "Configuration" or product recommendations)

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS491
number of pieces:	piece
EAN:	9009606491909
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	Wires
length:	19mm
Width:	7.8mm
Height:	2.8mm
Operating modes:	AC, DC, DCC, MM
Connection technology:	12 wires
Continuous current:	0.7 A (1.5 A peak)
Current motor output duration:	0.7 A (1.5 A peak)
Function output (total):	5 (+ 2 logic levels)
Current limit. Fu-Off:	0.5A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on solder pad max. 1000 µF
Low voltage for Fu output:	5 V (max. 50 mA on solder pad)
Switching inputs:	(2 alternative applications logic levels
Speaker output:	1 (1 watt/ 8 ohms)
Audio performance:	1 watt/8 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759