ZIMO STACO3A 1 x StayAlive controller (2 pieces 0.3F / 2.7V) Accessories - Wires

ZIMO STACO3A 1 x StayAlive controller (2 pieces 0.3F / 2.7V) Accessories - Wires

 

Technical details

1 x StayAlive controller (10x7.3x2mm) with 2 pieces of 0.3F / 2.7V gold caps (4x12mm each); for decoders with no or limited provisions for direct energy storage connection.
2 wires

2 miniature gold caps can be connected via the ZIMO STACO3A
For connection (via wires) to the decoder pads or pins "Decoder Plus / Gem. Plus" and "Decoder MASSE".
Dimensions: 10 x 7.3 x 2 mm
The StayAlive controllers may only be operated with a maximum of 18 V rail voltage!

2 mini gold caps are connected to the StayAlive controller via wires; This means that all parts (decoder, STACO, gold caps) are spatially distributed - in contrast to a massive "power pack". The board transforms the voltage of the gold caps (a total of 5.2 V for 2 gold caps; when fully charged, this drops to around 2 V over time) to 10 V, which is sufficient for the decoder's backup power supply in the event of wheel-rail contact interruptions (for drive and sound without loss of volume) and does not cause any interference, e.g. in service mode.
Scope of delivery ZIMO STACO3A:
1x STACO3
2x mini gold caps, 0.3F / 2.7V, 4x12mm
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	STACO3A
number of pieces:	2 gold caps
EAN:	9009606775344
Product Type:	Accesories
track:	neutral
Connections::	Wires
capacity:	2F
Current (V):	2.7V
length:	10mm
Width:	7.3mm
Height:	2mm
Age recommendation:	14 years and older
WEEE No.:	EN 19640759