ZIMO MS440C Sound Decoder - 30 x 15 x 4 mm MS Sound Decoder - MTC21 (NEM660)

ZIMO MS440C Sound Decoder - 30 x 15 x 4 mm MS Sound Decoder - MTC21 (NEM660)

 

Technical details

Sound decoder - 30 x 15 x 4 mm - Audio 3 W (4 Ohm) - 1.2 A - 8 FA FA3-FA6 preconfigured as logic level outputs (VHDM standard), connection for energy storage 15 V (any capacity).
MS440 only available with 21MTC interface, no wired versions
Note: Wired decoders (also ...R and ...F types) are each supplied with a free electrolytic capacitor of 680 to 1000μF. This is used to test the energy storage connection; with this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
ZIMO MS440C multi-protocol DCC, mfx, MM
MS sound decoder MS440C with 16-bit sound from ZIMO with 16 V energy storage connection
with 21-pin mtc interface according to NEM660

Dimensions 30 x 15 x 4 mm
Motor/total current: 1.2 A (2.5 A peak)
Audio power: 3 W
8 function outputs, 2 logic level and servo outputs equipped with all ZIMO features: DCC, mfx, MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
mfx with automatic registration at the digital center
Version with FA3, FA4, FA5 and FA6 as standard logic level outputs. This corresponds to the 21MTC standard. Alternatively, ZIMO also offers the MX440D with normal outputs.

Speakers from 4 to 8 ohms can be used.

The decoder is delivered with the BR50 sound project.
If you would like to have a different sound project installed, please order the desired sound project (free or coded) separately (see "Configuration" or product recommendations)

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS440C
number of pieces:	piece
EAN:	9009606440235
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	MTC21 (NEM660)
length:	30mm
Width:	15mm
Height:	4mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	21MTC FA3, FA4, FA5, FA6 logic level (standard)
Continuous current:	1.2 A (2.5 A peak)
Current motor output duration:	1.2 A (2.5 A peak)
Function output (total):	4 (+ 6 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	6
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on the solder pad
Low voltage for Fu output:	5 V (max. 50 mA on solder pad)
Switching inputs:	2
Speaker output:	1 (3 Watt/4 - 8 Ohm on MTC connector)
Audio performance:	3 watts/4 - 8 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759