ZIMO MN300P16 Miniature Non-Sound Decoder MN Locomotive Decoder - PluX16

ZIMO MN300P16 Miniature Non-Sound Decoder MN Locomotive Decoder - PluX16

 

Technical details

Miniature non-sound decoder - 17.6 x 10.5 x 3.1mm - 1 A - 6 FA Direct connection energy storage 15 V on PluX pin strip (up to 15,000 μF)

Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Small decoder MN300P16 from ZIMO with 15 V energy storage connection
PluX 16 interface according to NEM658 on board

Dimensions: 17 .6 x 10.5 x 3.1 mm
Motor/total current: 1.0 A (1.5A peak)
6 function outputs (4 on connector, 2 on solder pads), 2 logic level outputs , DCC and MM, servo control lines, SUSI, RailCom, NMRA and ZIMO function mapping, etc., not mfx-capable
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN300P16
number of pieces:	piece
EAN:	9009606300164
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	PluX16
length:	17.6mm
Width:	10.5mm
Height:	3.1mm
Operating modes:	AC, DC, DCC, MM, NOT MFX capable
Connection technology:	PluX16
Continuous current:	1.0A (1.5A Peak)
Current motor output duration:	1.0A (1.5A Peak)
Function output (total):	6 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes (15 V max. 15,000 µF)
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759