ZIMO MN300F variant of the MN300 MN locomotive decoder - 6-pin NEM651 on wires

ZIMO MN300F variant of the MN300 MN locomotive decoder - 6-pin NEM651 on wires

 

Technical details

Variant of the MN300, 6-pin interface NEM651 on wires, 5 free wires

Note: Wired decoders (also ...R and ...F types) are each supplied with a free electrolytic capacitor of 680 to 1000μF. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Small decoder MN300F from ZIMO with 15 V energy storage connection
6-pin interface according to NEM651 on cables

Dimensions: 17.6 x 10.5 x 3.1 mm
Motor/total current: 1.0 A (1.5 A peak)
6 function outputs (2 on the plug, 2 with wires, 2 on solder pads), 2 logic level outputs, DCC and MM, servo control lines, SUSI, RailCom, NMRA and ZIMO function mapping, etc., not mfx-capable
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN300F
number of pieces:	piece
EAN:	9009606300966
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	6-pin NEM651 on wires
length:	17.6mm
Width:	10.5mm
Height:	3.1mm
Operating modes:	AC, DC, DCC, MM, NOT MFX capable
Connection technology:	NEM651 (6 pin on wires)
Continuous current:	1.0A (1.5A Peak)
Current motor output duration:	1.0A (1.5A Peak)
Function output (total):	6 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes (15 V max. 15,000 µF)
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759