ZIMO MN300 Wired version of the MN300 MN locomotive decoder - wires

ZIMO MN300 Wired version of the MN300 MN locomotive decoder - wires

 

Technical details

Wired version of the MN300, 11 connecting wires (2 x rail, 2 x motor, common plus, ground, electrolytic capacitor plus, 4x FA) 4 soldering pads (2x FA, 2 SUSI)

Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Small decoder MN300 from ZIMO with 15 V energy storage connection
with 11 connecting wires
Dimensions: 17.6 x 10.5 x 3 .1 mm
Motor/total current: 1.0 A (1.5A peak)
6 function outputs (4 with wires, 2 on solder pads), 2 logic level outputs, DCC and MM, servo control lines , SUSI, RailCom, NMRA and ZIMO function mapping, etc., not mfx-capable
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MN300
number of pieces:	piece
EAN:	9009606300904
Product Type:	MN locomotive decoder
track:	neutral
Digital decoder:	Yes
Connections::	Wires
length:	17.6mm
Width:	10.5mm
Height:	3.1mm
Operating modes:	AC, DC, DCC, MM, NOT MFX capable
Connection technology:	11 wires
Continuous current:	1.0A (1.5A Peak)
Current motor output duration:	1.0A (1.5A Peak)
Function output (total):	6 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes (15 V max. 15,000 µF)
Low voltage for Fu output:	no
Switching inputs:	2
Speaker output:	no
Audio performance:	no
Sound memory:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759