ZIMO MS491L variant of the MS491, 6-pin MS sound decoder - 6-pin. NEM651 directly

ZIMO MS491L variant of the MS491, 6-pin MS sound decoder - 6-pin. NEM651 directly

Technical details

Variant of the MS491, 6-pin angled NEM651 interface directly on the board, 4 Dr.
Note: Wired decoders (also ...R and ...F types) each come with an electrolytic capacitor from 680 to 1000μF free of charge. This is used to test the energy storage connection; at this capacity the effect is already noticeable. For real use, much larger capacities, e.g. GoldCaps, are recommended.

The decoder is delivered with the sound collection ZSP01006 with steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sounds for BR211
If you would like to have a different sound project installed, please order the desired sound project (free or coded) separately (see "Configuration" or product recommendations)

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS491L
number of pieces:	piece
EAN:	9009606491077
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	6-pin NEM651 direct
length:	19mm
Width:	7.8mm
Height:	2.8mm
Operating modes:	AC, DC, DCC, MM
Connection technology:	NEM651 (6 pin connector)
Continuous current:	0.7 A (1.5 A peak)
Current motor output duration:	0.7 A (1.5 A peak)
Function output (total):	5 (+ 2 logic levels)
Current limit. Fu-Off:	0.5A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	Yes
Dir. Energy Saving Connection:	yes on solder pad max. 1000 µF
Low voltage for Fu output:	5 V (max. 50 mA on solder pad)
Switching inputs:	(2 alternative applications logic levels
Speaker output:	1 (1 watt/ 8 ohms)
Audio performance:	1 watt/8 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759