ZIMO MS460P26 Stereo Sound Decoder - 30 x 17 x 4.2 mm MS Sound Decoder - PluX26

ZIMO MS460P26 Stereo Sound Decoder - 30 x 17 x 4.2 mm MS Sound Decoder - PluX26

Technical details

Stereo sound decoder - 30 x 17 x 4.2 mm - Audio 2 x 3 W - 1.5 A - 9 FA Direct connection of energy storage 15 V (unlimited capacity) on PluX pin header, no wires

Note: Wired decoders (also ...R and ...F types) are each supplied with a free electrolytic capacitor of 680 to 1000μF. This is used to test the energy storage connection; the effect is already noticeable at this capacity. For real use, much larger capacities, e.g. GoldCaps, are recommended.
Stereo sound decoder MS460P26 with 16-bit sound from ZIMO with 15 V energy storage connection
PluX 26 interface on circuit board
Dimensions 30 x 17 x 4.2 mm
Motor/total current: 1.5 A (2.5 A peak)
Audio power: 2x 3 W
10 function outputs (including 1 on solder pads), 2 logic level and servo outputs
Equipped with all ZIMO features: DCC, mfx, MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.
mfx with automatic registration at the digital center
Loudspeakers from 4 to 8 ohms can be used.

The decoder is delivered with the ZSP01006 sound collection with Steam locomotive sounds for DB BR50 / BR78 / BR03.10 and diesel locomotive sounds for BR211
If you would like to have a different sound project installed, please order the desired sound project (free or coded) separately (see "Configuration" or product recommendations)

RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen
mfx is a registered trademark of Gebr. Märklin & Cie. GmbH, Göppingen

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MS460P26
number of pieces:	piece
EAN:	9009606460264
Product Type:	MS Sound Decoder
track:	neutral
Digital decoder:	Yes
Connections::	PluX26
length:	30mm
Width:	17mm
Height:	4.2mm
Operating modes:	AC, DC, DCC, MM, mfx
Connection technology:	PluX22 + 4 pins
Continuous current:	1.6 A (4.2 A peak)
Current motor output duration:	1.6 A (4.2 A peak)
Function output (total):	10 (+ 2 logic levels)
Current limit. Fu-Off:	0.8A
Logic level outputs:	2
LED outputs:	2
Servo outputs:	2
Servo control line:	No (ext. 5 V required)
SUSI:	yes+Y56:AG56
Dir. Energy Saving Connection:	yes on the PluX connector
Low voltage for Fu output:	5 V possible
Switching inputs:	1
Speaker output:	2 (3 watts/4 ohms)
Audio performance:	3 watts/4 ohms
Sound memory:	128 Mbps
Age recommendation:	14 years and older
WEEE No.:	EN 19640759