ZIMO MX686D Function Decoder - 20.5 x 15 x 3.5 mm Function Decoder - MTC21 (NEM660)

ZIMO MX686D Function Decoder - 20.5 x 15 x 3.5 mm Function Decoder - MTC21 (NEM660)

 

Technical details

Function decoder - 20.5 x 15 x 3.5 mm - 1.2 A - 8 FA Only with 21MTC interface, NO more wired decoder version!

Note: Each function decoder has a blue marking point to distinguish it from a driving decoder!
Function decoder MX686D from ZIMO
with 21-pin interface (like 21mtc) on the board, but all function outputs with amplified outputs contrary to NEM660. According to the standard, FA3 and FA4 should be logic level outputs.

Dimensions: 20.5 x 15.5 x 4 mm
Total current: 1.2 A
8 function outputs, 2 servo outputs, DCC and MM, SUSI, RailCom, NMRA and ZIMO function mapping, etc.

Function decoders do not have a motor output stage, but have special functions for controlling cars. All ZIMO function decoders can be given a second address with which this decoder can be controlled at another address. If this second address matches the address of the towing vehicle, the locomotive and the control car can be given commands at the same time with this function decoder.
 

 

 

Characteristics:

Manufacturer:	ZIMO
Item number:	MX686D
number of pieces:	piece
EAN:	9009606686213
Product Type:	Function decoder
track:	neutral
Digital decoder:	Yes
Connections::	MTC21 (NEM660)
length:	20.5mm
Width:	15.5mm
Height:	3.5mm
Operating modes:	DCC, MM, DC, AC
Connection technology:	21MTC
Continuous current:	1.2A
Function output (total):	8
Current limit. Fu-Off:	total 1.2 A
Logic level outputs:	2, old. to SUSI
Servo outputs:	2, old. to SUSI
SUSI:	Yes
Dir. Energy Saving Connection:	Yes
Low voltage for Fu output:	no
Age recommendation:	14 years and older
WEEE No.:	EN 19640759