ZIMO ADAPLU locomotive board with PluX22 socket adapter board

ZIMO ADAPLU locomotive board with PluX22 socket adapter board

Technical details

Locomotive board with PluX22 socket, connection as solder pads - 45 x 15 x 4 mm for ZIMO (sound) decoder with PluX interface (MX623P12, MX630P16, MX685P16 and MX648P16 are NOT permitted!), own rectifier to increase performance (continuous motor total current 1.8 A).

Note: For software update/sound loading, the decoder must be removed from the ADAPLU15/50.

Adapter board for PluX22 decoder; the decoder is plugged into the socket strip of the adapter. The wiring within the locomotive can be carried out conveniently using large solder pads, with the connections (plus lines) common to a variety of devices being implemented multiple times. The ADAPLU adapter board is equipped with a rectifier that relieves the decoder's rectifier, causing it to generate less heat and deliver more power.
The ADAPLU, ADAPLU15 and ADAPLU50 adapter boards can be used with all PluX decoders from the ZIMO range that are equipped with a 16 V energy storage connection on the PluX interface (e.g. MS450P22, MS450P16, MS480P16, MN330P22, MN300P16).

ATTENTION: The ADAPLU must NOT be used with PluX decoders that do not have a 16 V energy storage connection (such as MX623P12, MX630P16 and MX648P16)!!

 

Characteristics:

Manufacturer:	ZIMO
Item number:	ADAPLU
number of pieces:	piece
EAN:	9009606522009
Product Type:	Adapter board
track:	neutral
length:	45mm
Width:	15mm
Height:	4mm
Age recommendation:	14 years and older
WEEE No.:	EN 19640759