ESU 51830 - SwitchPilot 3, 4-way magnetic decoder, DCC/MM, OLED, with RC feedback, updateable, RETAIL packed

ESU 51830 - SwitchPilot 3, 4-way magnetic decoder, DCC/MM, OLED, with RC feedback, updateable, RETAIL packed

 

Technical details

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double-coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumers. In order to make the configuration, which was previously rather complicated with magnetic decoders, easier, the SwitchPilot 3 has an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.

Operating modes

The SwitchPilot 3 is multi-protocol capable and can be used with control panels based on the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-capable control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out.

How it works

The SwitchPilot 3 can either be powered directly from the digital system or an external direct or alternating voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 output pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be individually configured for the desired application: In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has expired prevents the magnetic device drives from burning out. In momentary operation (K83 compatible), the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for point drives with limit switching or for uncoupling tracks. In bistable continuous operation (k84 compatible), the two outputs are switched on and off alternately: When you press the first button (red) on the control panel, the output Out A is switched on. It remains active until the output Out B of the same output group is activated by pressing the assigned button (green). Out A and Out B behave like a toggle switch. In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The alternating indicator is started with the “Straight/Green” command of the assigned button and stopped again with the “Branching/Red” command. Optionally, the output can also be slowly faded up and down (so-called “zoom” for light bulb simulation). With the operating mode switch of the SwitchPilot 3, you can quickly switch all output pairs together to the “k83” or “k84” operating mode, regardless of how they are configured.

Feedback

Because the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly when installed, if desired. In conjunction with an ECoS as an ideal “partner”, the SwitchPilot 3 can record and display the actual switch position with appropriately prepared switch drives. Finally you have the certainty that your switch has switched correctly!

Setting

The SwitchPilot 3 can be flexibly installed either on the programming track with DCC central units or on the main track with POM (“ Programming on Main") can be set or CVs can also be read out using RailCom®. If desired, it can also learn the addresses directly using a programming button. The easiest setting is of course with the integrated OLED display and the three input buttons: All (!) settings can be checked directly on the decoder and changed if desired. “Programming” with the help of your control center is not necessary. It really couldn't be easier. The ESU LokProgrammer can be used for firmware updates.

Protection

As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible.

 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	51830
number of pieces:	1 piece
EAN:	4044645518304
Product Type:	steering
track:	neutral
Connections::	Plug
length:	86mm
Width:	86mm
Height:	25mm
Operating modes:	MM, DCC
Weight:	75.3g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525