ESU 51801 - SwitchPilot Extension, 4x relay output, extension for SwitchPilot V1.0

ESU 51801 - SwitchPilot Extension, 4x relay output, extension for SwitchPilot V1.0

 

Technical details

The SwitchPilot can be supplemented with the SwitchPilot Extension Module if required: docked to the side of the SwitchPilot, it offers 4 relay outputs for switching potential-free consumers or for core polarization.

Operating modes

The SwitchPilot Extension Module only works in conjunction with a SwitchPilot. Plugged in to the side, it is supplied with power directly from the SwitchPilot. It contains a total of 4 double relays (2 x UM), each of which is permanently assigned to a transistor output pair of the SwitchPilot. The position of the respective relay depends directly on the switching state of this output pair.
With the help of the relay, consumers can either be switched galvanically isolated from the rest of the track circuit (function analogous to k84) or a motorized switch drive can be reversed.
As each relay can handle up to 1.5A continuous current, it can not only be used to polarize switch frogs, but also to supply block sections with voltage depending on the signal or to switch motorized drives such as (water) pumps.
The option of controlling motorized switch drives is particularly clever: the SwitchPilot Extension Module can of course also handle the motor polarity reversal required for this.

 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	51801
number of pieces:	1 piece
EAN:	4044645518014
Product Type:	steering
track:	neutral
Connections::	Plug
length:	86mm
Width:	86mm
Height:	25mm
Weight:	26.6g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525