ESU 50095 - ECoSDetector feedback module extension. 32 digital outputs 100mA for bulbs or LEDs, lighting track diagram control panel.

ESU 50095 - ECoSDetector feedback module extension. 32 digital outputs 100mA for bulbs or LEDs, lighting track diagram control panel.

Technical Details

The ECoSDetector Extension Module is intended to use the ECoSDetector Module to set up an external track diagram control panel (GBS), which is then connected to the ECoS. A track diagram control panel is indispensable for many model railway enthusiasts for convenient switching of routes, especially in (shunting) stations, especially if the control center is located further away.
ESU's philosophy in this context is not to provide you with a complete, commercial track diagram control panel sell. Rather, with our solution approach, you can either build your control panel completely yourself or use commercially available systems (e.g. Erbert®).
The LEDs installed there for illuminating occupied sections of track or displaying the switches/signal positions are switched appropriately by the ECoS. If you would also like to use the track diagram control panel to switch your switches and signals directly, external buttons can be arranged. The switch position is read in by the input channels of the ECoSDetector module and passed on to the ECoS for evaluation. The corresponding commands are then executed there. For the GBS, you therefore need inputs for the buttons (these are provided by the ECoSDetector) as well as outputs for illuminating the LEDs (these are provided by the ECoSDetector Extension).
The ECoSDetector Extension module is attached to the side of the ECoSDetector connected. The extension receives all commands via this. The extension cannot function without ECoSDetector.

Outputs

Each of the 32 outputs can be loaded with a maximum of 100mA. Since these are designed as “open collectors”, you can connect either incandescent lamps or LEDs with a series resistor directly to them.
However, the total current of all outputs must not exceed 1.5A.
Any DC can be used for the supply. or AC voltage transformer can be used.
The transistor outputs of the ECoSDetector Extension Module can be easily set to the desired operating mode on your ECoS.

 

Characteristics:

Manufacturer:	ESU
Item number:	50095
number of pieces:	1 piece
EAN:	4044645500958
Product Type:	steering
track:	neutral
operation mode:	Digital
length:	86mm
Width:	86mm
Height:	25mm
Weight:	130g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525