ESU 54674 - PowerPack MIDI, energy storage with MCU for LokPilot 5 / LokSound 5, 6*1F/2.7V, 20.5 x 13.5 x 14.5mm

ESU 54674 - PowerPack MIDI, energy storage with MCU for LokPilot 5 / LokSound 5, 6*1F/2.7V, 20.5 x 13.5 x 14.5mm

 

Technical details

The ESU PowerPack Midi can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.

With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption .

The PowerPack Midi, which is equipped with a microcontroller for the first time, has an integrated charging circuit and is controlled by the decoder. It can therefore remain in the locomotive during programming. The charging current is also limited to prevent excessive strain on your booster if multiple models are in use. The buffer time can be limited using a CV on the decoder side, so that red signals also lead to an exact signal stop. The output voltage is adjusted fully automatically to the rail voltage by the microcontroller in order to avoid flickering of the lighting when buffering is inserted.

The PowerPack Midi's space requirement of approx. 20.5 mm x 13.5 mm x 14.5 mm is essential when installing be taken into account. A 3-pin cable connection is required between the decoder and PowerPack Midi.


 

 

 

Characteristics:

Manufacturer:	ESU
Item number:	54674
number of pieces:	1 piece
EAN:	4044645546741
Product Type:	Accesories
track:	neutral
Connections::	Wires
capacity:	6 x 1 F
Current (V):	2.7V
length:	20.5mm
Width:	13.5mm
Height:	14.5mm
Weight:	46.1g
Age recommendation:	14 years and older
WEEE No.:	DE62103961
BattG registration number:	21002525