BRAWA 51030 - H0 passenger car C4i DRG

BRAWA 51030 - H0 passenger car C4i DRG

Role model information

With the class 39 express train cars, the Reichsbahn wanted to finally usher in the era of rapid transport and increase the speeds of passenger trains. In order to achieve this, the air turbulence factors that were disruptive to previous wagon designs had to be reduced. As with the type 35 cars, the type 39 increasingly relied on welding technology. However, the designers' main focus was on making the outer shell of the vehicles as smooth as possible. The areas under the frame and around the bogies in particular previously caused a lot of air resistance and so it was obvious to cover these vehicle parts with side panels. The eponymous apron was invented.

The construction, however, had further sophisticated details for the time. The entrance doors were set to the outside. A complex folding mechanism ensured that the doors opened together with the side panels despite the pivot point being deep in the car. The side window frames were also flush with the outer sheet metal. In order to create the necessary window shaft, the carriages are about 40 mm wider below the parapet.

In total, the Deutsche Reichsbahn planned to purchase over 1,000 cars in various designs. However, due to the war, only 543 series vehicles were delivered between 1939 and 1940, which were divided into 103 AB4ü-38, 310 C4ü-38, 65 ABC4ü-39 and 65 BC4ü-39. In parallel to the seating cars, Mitropa initiated a revision of the WR4ü-35 design in the wagon industry. Unlike the seated carriages, however, no completely new design was created. Rather, the entrance doors that were moved to the outside were adapted and the frame apron was added. The inwardly offset windows were retained, as was the different window height.

Due to the late delivery of the cars, operations were rather limited until the express train service was stopped due to the war. Many wagons were therefore stored in supposedly safe train stations to protect them from destruction. The fact that this was not always successful is demonstrated by various cars that were written off as war losses.
The vehicles that survived the war unscathed largely remained in West Germany. In addition to some confiscations by the occupying forces, the German Federal Railways largely prepared the cars for their newly established F-train network. The apron cars were ultimately the most modern and comfortable passenger cars on German rails at the time.

With increased deliveries of the new 26.4 m m cars from the second half of the 1950s, the DB continued the vehicles are increasingly being used in normal express trains. It would take until the mid-1970s before the last Schürzenwagen left the DB's vehicle fleet in reserve parks for military and troop transport. The wagons that remained with the Deutsche Reichsbahn Ost were transferred to the DR East in a modernization program at the beginning of the 1960s and were converted into so-called modernization wagons. In addition, some vehicles remain with the ÖBB and the SNCF.

Model details

Metal axle holder
Prototypical axle bearing covers
Brake shoes in wheel level
Individually attached steps and steps
Extra attached axle brake linkage
Multi-part brake system
Interior fittings suitable for variants
Extra attached spring packs
Complete replica of the vehicle floor
Interior lighting prepared or installed
Short coupling kinematics

Technical details

Length over buffer: 244 mm
Interface: soldering points
Interior: built-in
Interior lighting: installed
Short coupling kinematics: installed
AC wheelset replacement: no, not recommended
AC wheelset: BRAWA order no. 2187
AC grinder: BRAWA order no. 2222

 

Characteristics:

Manufacturer:	BRAWA
Item number:	51030
number of pieces:	1 piece
EAN:	4012278510309
track:	H0
scale:	1:87
model series:	Passenger car Apron car / Group 39
Company number:	19 381 Reg
Railway company:	DRG
country:	EN
epoch:	II
Wheel set replacement:	no - not recommended
AC wheelset:	BRAWA order no. 2187
grinder:	BRAWA order no. 2222
Electricity system:	DC
operation mode:	DC LED
interface:	Solder points
Length over buffers:	244mm
coupling:	NEM 362 shaft with KK kinematics
Interior decoration:	equipped with interior furnishings
Interior lighting:	built-in
Age recommendation:	14 years and older
WEEE no.:	DE14862574