BRAWA 50071 - H0 Open freight wagon 11 SNCB

BRAWA 50071 - H0 Open freight wagon 11 SNCB

Role model information

In order to promote the renewal of the wagon fleets and the standardization of freight wagons on the European state railways, the UIC (Union Internationale de Chemins de Fer) had two variants for an open freight wagon at the beginning of the 1950s designed. The UIC Type I and UIC Type II. The UIC Type II was very much based on German pre-war developments with its dimensions of 10.0 m long and 5.4 m wheelbase. The entire frame and car body were completely welded. With the completion of the detailed construction, the Deutsche Bundesbahn in the Aw Kaiserslautern began to renew its O-car fleet based on the UIC Type II. Within two years, starting in 1954, 10,589 Omm54 cars were built in Kaiserslautern. Even though these were officially conversions from usable parts of older cars, almost exclusively new material was used for the cars. Only for the brake components were Kkg brakes from the donor cars used. In the following construction lots, which were referred to as Omm55, this was dispensed with and new KE brakes were installed. The DB also procured over 17,300 of these from 1955 onwards. Thanks to many detailed improvements during ongoing production and later design changes, the vehicles were maintained throughout their life cycle and were ultimately only completely phased out in 1994. In addition to the Deutsche Bundesbahn, other state railways also purchased wagons according to the UIC Type II specifications for their fleet. For example, the DR Ost, SNCF, SNCB, FS, MAV, ÖBB, SBB, CSD, DSB etc. have been hired, some of which differ in country-specific details or assemblies.

Model details

Many design differences taken into account
Variants without and with handbrake
Many extra details
Wheels profiled on both sides
Metal car floor
Different versions of the brake systems
Three-point bearing for safe operation
Axle holder made of metal
Inner profiled side doors

Technical details

Length over buffers: 114.9 mm
Short coupling kinematics: installed
AC wheelset replacement: possible
AC wheelset: BRAWA order no. 2187

 

Characteristics:

Manufacturer:	BRAWA
Item number:	50071
number of pieces:	1 piece
EAN:	4012278500713
track:	H0
scale:	1:87
model series:	Freight wagon UIC Type II / Omm55
Company number:	2289004
Railway company:	SNCB
country:	BE
epoch:	III
Wheel set replacement:	yes - possible
AC wheelset:	BRAWA order no. 2187
Electricity system:	DC
operation mode:	DC analogue
Length over buffers:	114.9mm
coupling:	NEM 362 shaft with KK kinematics
Age recommendation:	14 years and older
WEEE no.:	DE14862574