Sound-ready kit for Loks H0 2x speakers (wired) 2x capacitor

Product no.: 1002024

Modelleisenbahn-Shop - Sound-ready kit for locomotives H0 2x speakers (wired) 2x capacitor (16V, 2200 μF)

Sound-ready kit for locomotives H0 2x speakers (wired) 2x capacitor Roco/Fleischmann/ESU.

A kit for retrofitting analog locomotives for sound and to bridge smaller powerless areas.
The small ones Speakers are ideal for retrofitting ESU or Zimo Loksound.
The speakers fit into many Roco / Fleischmann or ESU models.
Ideal for analog Roco Vectron models (Br 170/193/483/1293), es No sound capsule is required as these are already installed at the factory.

!!! Important !!!
This capacitor design is only suitable for the Vectron models with new circuit boards (black, see photo), here the recess for the capacitor is of the right size.
Older circuit boards (mostly green in color) only offer space for smaller capacitors. A corresponding kit can be found under item number: 1002019.

For Roco Taurus models (Br 182/1116/1216). 2 support capacitors must be installed on the new circuit boards.
For some other models, a sound capsule may be required.

Product data & scope of delivery:
Speaker dimensions: 11 x 15 x 3.5 mm
wired with 2 approx. 8.5 cm long strands (length corresponds to ESU cable ties)
8 Ohm, 1 W

Scope of delivery: 2 pieces (as most Locomotives now have two speakers)

Dimensions aluminum electrolytic capacitor: Length: 20mm Diameter: 10mm (dimensions without solder contacts)
16V, 2200 μF / uF
Scope of delivery: 2 pieces

 

Characteristics:

Manufacturer:	Modelleisenbahn-Shop
item number	1002024
number of pieces:	set
connections:	Contact springs/wires
capacity:	2200uF
Current (V):	16V
length:	15mm
Wide diameter:	11mm
Height:	3.5mm
Operating modes:	DC
Connection technology:	Contact springs/wires
Audio performance:	2x (1W, 8 ohms)
track:	H0
Age recommendation:	14 years and older