Doehler & Haass PD06A-0 - vehicle decoder

Product no.: PD06A-0

Doehler & Haass PD06A-0 - vehicle decoder

 

Technical details

Vehicle decoder for miniature motors PD06A for SX1, SX2 and DCC

Product features and functions
For optional operation with conventional DC driving devices, digital systems according to SelecTRIX 1 and 2 or according to DCC format
Switching between analog and digital operation is automatic
In digital operation, the last programmed system is used (it does not switch automatically!)
SelecTRIX 1 31 speed levels, 100 addresses
SelecTRIX 2 127 speed levels, 10,000 addresses, 16 additional functions
DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed levels
Load control of the latest generation, resulting in particularly smooth control behavior
Various control variants for optimal adaptation to the motor
Internal 127 speed levels
Adjustable motor frequency (16 kHz, 32 kHz)
Block section operation with simple diodes in digital mode
Light and function outputs can be dimmed and activated analogue
Shunting gear
Motor, light and track connections can be exchanged electronically
All function outputs are freely programmable
Temperature protection
Reset function for DCC and SX2
Decoder can be updated

The vehicle decoder for miniature motors PD06A is a new, particularly small vehicle decoder for miniature motors for SX1, SX2 and DCC operation. There are some minor limitations compared to the DH decoder series:
No support for MM mode
No support for SX1 programming (SX1 operation is possible through SX2 parameter programming, however)
No SUSI interface
No low-frequency motor control (16 kHz or 32 kHz can be selected, however)
No extended function assignments (i.e. no conditions, no initial mapping, etc.)
No automatic coupling sequence
No braking with asymmetric digital voltage and no slow travel
No braking ramp

 

 

 

Characteristics:

Manufacturer:	Doehler & Haass
Item number:	PD06A-0
number of pieces:	1 piece
Product Type:	Vehicle decoder
track:	neutral
Digital decoder:	Yes
Connections::	Solder pads, without connecting wires
Current (V):	18V
length:	6.8mm
Width:	11.4mm
Height:	2.8mm
Operating modes:	SX1, SX2, DCC, DC
Connection technology:	Solder pads
Continuous current:	0.5A
Current motor output duration:	0.2A/6V
Function output (total):	2 + 2 x light
Current limit. Fu-Off:	300 mA (dimmable)
LED outputs:	150 mA each (dimmable)
Servo outputs:	No
SUSI:	No
Dir. Energy Saving Connection:	No (possible via VS (+) and GND (-))
Speaker output:	No
Sound memory:	No
Age recommendation:	14 years and older
WEEE No.:	DE 28016265